Intermatic MULTIWAVE PE653RC - Chapter 6; Programming - Variable Speed Pump Options Screens; Pentair Variable Speed Pump Options Screen; Con Guring Pentair Variable Speed Pump Names

www.intermatic.com
30
MultiWave Control System Programming and User Guide
Chapter 6:
Programming — Variable Speed Pump Options Screens
If you have a variable speed pump, follow these procedures to set names and speeds for each of
the variable speeds and a maximum speed.
¸ Conguring Pentair Variable Speed Pump Names
¸ Conguring Pentair Variable Speed Pump Speeds
¸ Setting a Pentair Variable Speed Pump Maximum Speed
¸ Conguring Other Variable Speed Pump Names
¸ Conguring Other Variable Speed Pump Speeds
¸ Setting an Other Variable Speed Pump Maximum Speed
Pentair
®
Variable Speed Pump Options Screen
&RQÀJXULQJ3HQWDLU9DULDEOH6SHHG3XPS1DPHV
Follow the procedure below to congure the Pentair variable speed pump name settings in the
controller.
1. Press ENTER to display the VARSPD PEN screen.
2. Press P/S and ENTER simultaneously to access LEARN MODE.
3. Press to scroll to the VSP NAMES screen.
4. Press a number button (1-4) for the speed you want to name. The
screen highlights the rst letter.
5. Press or to adjust the rst letter to the desired character (A-Z,
1-9, and SPACE) and press P/S to move to the next character.
6. Repeat step 5 as necessary to complete the variable speed name.
7. When the name is complete, press ENTER to save.
8. Repeat procedure to congure more variable speed names.