Intermec CK70 Instructions

3
CK70/CK71 Magstripe Reader Adapter
(1001AA01) Instructions
Configuring the COM Port
Before you attach the adapter for the first time, you need to configure the
COM port.
1 Tap Start > Settings > System > Intermec Settings >
Communications > Serial Port Switch > select COM5 back accessory.
2 When prompted to save and reboot, tap ok.
3 Tap OK to save.
4 Press the Power button.
5 Tap Reboot. The computer systematically reboots.
Installing the Adapter
1
2
34

Intermec CK70 Specifications

General

Brand	Intermec
Model	CK70
Category	Handhelds
Language	English