Intermec EasyCoder 3400 Quick Start Guide

6 23
Direct Thermal Media Sensitivity Settings (continued)
Approx. Sensitivity Sensitivity Max. Recommended
Numbers Setting Direct Thermal Media Print Speed
400 Series Medium 470 Duratherm Lightning - 1 5
Sensitivity 460 European IR 5
(continued) 450 Duratherm Lightning IR Labels - 1 5
440 European Thermal 5
420 Duratherm Lightning Labels - 1 5
100 Series Low 180 Duratherm II 3
Sensitivity
170 European Tag 3
160 Duratherm II Tag 3
140 European Top 3
130 Duratherm II - 2 3
800 Series Low 180 Duratherm II 3
Sensitivity
170 European Tag 3
160 Duratherm II Tag 3
600 Series Medium 687 Duratran TTR Polyester 6
Sensitivity 1/Premium - 7
677 Duratran Syntran/Premium - 7 6
633 European Polyethylene/Premium 8
627 Duratran Kimdura/Premium - 7 8
623 Duratran Kimdura/Premium 6
Thermal Transfer Media and Ribbon Sensitivity Settings
Approx. Sensitivity Sensitivity Max. Recommended
Numbers Setting Direct Thermal Media Print Speed
500 Series Medium 567 Duratran II-1/Premum - 7 8
Sensitivity (Paper)
565 European Premium Paper/Premium 4
563 Duratran II-1/Premum 7
533 European Tag/Premium 6
527 Duratran II Tag - 7 mil/Premium 6
513 European Coated/Premium 6
300 Series Low 369 Super Premium Poly./Super 5
Sensitivity Premium - 3
366 Super Premium Poly./Super 5
Premium - 7
200 Series Low 238 Gloss Polyimide (Kapton)/ 3
Sensitivity (Kapton) Gloss Super Premium
236 Gloss Polyimide (Kapton)/ 3
Super Premium - 7
226 Matte Polyimide (Kapton)/ 3
Super Premium - 7
222 Matte Polyimide (Kapton)/ 3
Matte Super Premium - 7
Understanding the Printer Front Panel
On the front panel of your printer, you will find one button and three light emitting diodes (LEDs).
Use the front panel LEDs to monitor the status of the printer:
3440G.002
Power
Alert
Empty/Pause
Feed/Pause
Power
Green LED
Alert
Empty/Pause
Off
Flashing
On
Off
Flashing
On
Off
Flashing
On
Power off
Receiving data
Power on
Printing or idle
Over-temperature
System fault
Printing or idle
Paused
Media fault
LED State Indication
Orange LED
Yellow LED
The Feed/Pause button performs the following functions depending on the status of the printer:
Printer Mode You Want To What To Do
Idle Feed out one label or Press and release the Feed/Pause button.
a minimum specified
amount of media.
Continuously feed media. Press and hold the Feed/Pause button. When
you release the button, the media stops feeding.
Take the printer offline. Press the Feed/Pause button twice. Press the
button again to bring the printer online.
Printing Pause the printer. Press and release the Feed/Pause button. Press
and release the button again to resume
printing.
Cancel the current print Press and hold the Feed/Pause button until the
job. printer stops printing.
Powered on for Print the hardware Press and hold the Feed/Pause button. See
the first time configuration test label. “Testing Printer Operation” later in this
guide for more information.

Intermec EasyCoder 3400 Specifications

General

Brand	Intermec
Model	EasyCoder 3400
Category	Printer
Language	English