Intermec EasyCoder PD41 Instructions

EasyLAN Ethernet Software Instructions 9
Setting Network Parameters with Fingerprint
Commands
If your printer is running Fingerprint firmware, you can modify
all network parameters with the Fingerprint
Setup command.
To modify network parameters with Fingerprint commands
1 Establish a serial connection between your computer and
printer, as described on page 8.
2 Switch user to administrator with the default login
(username: admin, password: pass).
RUN su -p pass admin
3 Set the IP selection method to manual:
SETUP "NETWORK,IP SELECTION,MANUAL"
4 Set the IP address (values are examples only):
SETUP "NETWORK,IP ADDRESS,192.168.235.860"
5 Set the netmask, default router and name server (values are
examples only):
SETUP "NETWORK,NETMASK,255.255.255.0"
SETUP "NETWORK,DEFAULT ROUTER,192.168.236.1"
SETUP "NETWORK,NAME SERVER,255.255.78.120"
Once you have set the parameters above you can use your web
browser to access the printer home page and make the rest of
your changes there.
Setting Network Parameters with IPL commands
If your printer is running IPL firmware, you can modify various
setup parameters with the IPL
<SI> command.
To modify network parameters with IPL commands
1 Establish a serial connection between your computer and
printer, as described on page 8.
2 To set IP address and use default values for netmask and
router, use this command (values are examples only):
<STX><SI>n192.168.235.860<ETX>
3 To set the IP address, netmask, and default router values
(values are examples only):

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g