Intermec EasyCoder PX4i Spare Parts

Chapter 1 — Introduction
2 EasyCoder PX4i and PX6i Printers Spare Parts Catalog
Spare Parts Policy
This Spare Parts Catalog contains information on items presently available
as spare parts and accessories for the Intermec EasyCoder PX4i and
EasyCoder PX6i printers.
For further information about parts not listed in this catalog, please contact
your Intermec distributor or Intermec’s service personnel.
Information in this manual is subject to change without prior notice and
does not represent a commitment on the part of Intermec.
Note: For updated information, please refer to the latest edition of the
Spare Parts Price List.
Some electrical parts may appear to be the same as for EasyCoder 501
XP and EasyCoder 601 XP printers. This applies to printheads,
printhead cables, and interface boards. They are not compatible and
installing the wrong part may render the printer inoperable or even
cause damage. Always double-check before replacing any kind of
electronics.

Intermec EasyCoder PX4i Specifications

General

Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Display	LCD
Product color	Silver
Keyboard layout	Numeric
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	120 mm
Maximum label length	2.7 m
Maximum roll diameter	213 mm
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	275 mm
Weight	12850 g