Appendix A — Specifications
130 PM4i Mid-Range Printer User’s Manual
76 mm (3-in) Adapter
Use the 76 mm (3-in) adapter with a rotating media supply hub to use
media rolls with 76 mm (3-in) inner diameter cores. The adapter
cannot be used with a media supply roll post.
Label Taken Sensor
The Label Taken Sensor (LTS) is a photoelectric sensor that enables
the printer’s firmware to detect if the last printed label, ticket, tag, etc.
has been removed before printing another copy. The LTS cannot be
used with a paper cutter.
If you are running Fingerprint or Direct Protocol, you can enable or
disable the LTS using the commands LTS& ON and LTS& OFF. For
help, see the Intermec Fingerprint Command Reference Manual.
Internal Fanfold Guide
Use the internal fanfold guide to facilitate loading media from an
external supply. The internal fanfold guide cannot be used in peel-off
(self-strip) mode or with the label slack absorber.
Tear-Off Bar
The adjustable tear-off bar is particularly useful when delicate media
is used in peel-off operation.
Real Time Clock
The Real Time Clock (RTC) automatically keeps track of the current
time. The RTC has its own backup battery backup that lasts for at
least 10 years.
External Keyboard Converter
Use this converter to connect a standard PS2 keyboard to your
printer’s serial port.
Font Card
The font card is a CompactFlash memory card loaded with double-
byte font sets including Kanji, Korean, and Chinese.
Side Door With Keylock
If the media is valuable or sensitive, such as tickets, you can install a
side door that can be locked with a key.
To Next Page
Loading...
Need help?
General