Nugg
Co de 39
Running Diagnostics
7-13
7
Display Test
Purpose: Use the Display Test to make sure that every pixel on the terminal screen is working
correctly. For example, you may want to test the screen if you do not see complete
characters on the screen.
Where Available: Hardware Diagnostics menu
Sample Screen:
242XU.135
DISPLAY TEST
[Enter] Next pattern
[Esc] Exit
Definition: Press
to display each of the four patterns. After 5 seconds, the entire screen is filled
with the current test pattern. Press
to display the next pattern. The first two patterns
appear as a shaded pattern and turn off every other pixel. The third pattern turns on every
pixel and appears as a black square. The fourth pattern turns off every pixel and appears
as a clear square.
If any of these patterns do not display correctly, you may have a problem with the LCD.
For help, contact your local Intermec service representative.
To Next Page
Loading...
