Intermec TRAKKER Antares 2420 - Page 3

nuggetf
code39
Manual Change Record
This page records the changes to this manual. The manual was originally released as version 001.
Version Date Description of Change
002 July 1997 This manual was changed to add information about the TRAKKER Antares
2420 terminal and to document the new firmware version. The new information
includes:
• The TRAKKER Antares 2420 terminal and features.
• RS-232 serial communications on the TRAKKER Antares 2425 terminal.
• TRAKKER Antares firmware version 2.10.
• Multiple drives and applications on the TRAKKER Antares 2420 and 2425
terminals.
• Western European keypad and character support on the TRAKKER
Antares 2420 and 2425 terminals.
All the functionality described in this manual applies to TRAKKER Antares
terminals with firmware version 1.X and higher. However, this manual does
describe features that are only available in TRAKKER Antares firmware
version 2.0 and higher.
003 December 1997 This manual was changed to add information about the TCP/IP radio frequency
network protocol option on the TRAKKER Antares 2425 terminal and to
document the new firmware version. The new information includes:
• TRAKKER Antares 2420 and 2425 firmware version 2.20.
• The TCP/IP network protocol option on the TRAKKER Antares 2425
terminal that allows a direct connection from the access points to the host
computer.
• New terminal emulation features including auto-login, password security
for the TE Configuration Menu, and international characters display
support in TE applications.
The manual was also reorganized to move all information about terminal
emulation applications into a separate guide that ships with the manual. The
TRAKKER Antares Terminal Emulation User’s Guide now contains all the
information you need to configure and use terminal emulation applications. All
other information is covered in this user’s manual.