Intermec TRAKKER Antares 2420 - Page 6

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
nuggetf
code39
vi
Learning How to Use the Terminal
TRAKKER Antares Terminal Features 2-3
Using the Keypad 2-4
Finding the Special Keys 2-4
How to Type the Characters Printed on the Keypad 2-6
Using the Function Left/Right and Shift Keys 2-7
Capitalizing All Characters 2-8
How to Use the Cursor Keys 2-9
Using the Western European Keypad 2-9
Quick Reference Keypad Chart 2-12
How to Use the Terminal’s Screen 2-15
Using the Screen As a Viewport 2-16
Adjusting the Screen From the Keypad 2-16
Understanding the Icons 2-18
Understanding the Terminal’s Audio Signals 2-20
Locating the Serial Port 2-21
Learning About the Terminal’s Batteries 2-22
Main Battery Pack 2-22
Removing and Installing the Main Battery Pack 2-22
Charging the Main Battery Pack 2-27
Backup Battery 2-28
Charging the Backup Battery 2-28
Removing and Installing the Backup Battery 2-29
Disposing of the NiCad Backup Battery 2-33
Recognizing a Low or Discharged Battery 2-34
Managing Your Battery Power 2-35
Using an External Power Supply 2-36
Defining the Terminal’s Memory and Drives 2-37
Using the Scan Module 2-38
Installing a Scan Module 2-39
Using the Standard Range Scan Module 2-40
Scanning Options 2-42
2