UM062TW / UM562TW UDM10010-01
18
MAINTENANCE
Depending on usage, grease acme shaft about in three months intervals.
Open up drive base by winding handle, apply grease to the acme shaft between the cast iron
drive base supports, then close the drive base and repeat application to the outside of cast
iron drive base supports. Recommended lubricants are: 1
st
Beacon 325 (ESSO brand), 2
nd
graphite base greases, 3
rd
standard ball-bearing grease.
Spray column shaft once a month with silicon based dry film lubricant. This won’t attract dust
and lint from the surroundings.
No other lubrication is necessary to operate the machine.
To Next Page
Loading...