Interpack USA 2024-SB - Page 30

UM094TW / UM594TW UDM094-04
30
S ET -U P P ROCEDURES
9. Removing Tape Heads Prior to Tape Loading
Removing Upper Tape Head
Figure-16
1. Slide Tape Head Toward The Infeed End Of Machine And Rotate Up.
2. Slide Tape Head Toward The Exit End Of Machine And Lift Out Of Rear Slot.
Removing Lower Tape Head
Figure-17
1. Remove Gap Filler by Lifting Straight Up.
2. Gripping the Stationary Cross Shafts, Lift the Tape Head Straight Up and Out of The
Slots.
Top Tape Head Box
Assembly Removed For
Clarit
y
.