UM094TW / UM594TW UDM094-04
37
2. Preparation Of Case To Be Processed
Figure-27 Figure-28
a. Flap Folding
i. Fold Minor Flaps In As Shown In
Figure-27
ii. Fold Major Flaps In As Shown In
Figure-28
Figure-29 Figure-30
b. Over Fills And Void Fills.
Over Fills As Shown In
Figure-29
And Void Fills As Shown In
Figure-30
Should Be Avoided To Assure Proper Processing Of The Corrugated Case.
Each Of These Scenarios Put Stress On The Pressure Sensitive Tape Seal
Which Could Be Detrimental To The Integrity Of The Closure.
To Next Page
Loading...