UM094TW / UM594TW UDM094-04
39
5. Top Squeezer Adjustment
a. Slide Each Top Squeezer To Contact The Case Firmly
And Tighten Each Locking Knob As Shown In
Figure-34
.
Each Top Squeezer Should Be Firm Enough On The Case
To Completely Close Any Gap On The Center Seam But Not
So Firm As To Restrict The Smooth Processing Of The Case
Figure-34
6. Power On.
a. Rotate The E Stop Clockwise 1/4
th
Turn To Reset
The Knob As Shown In Figure-35
b. Push The Green Start Button To Start The Machine
And Process The Case
Figure-35
To Next Page
Loading...