Intertek Acme Solat Impulse - Animation;Color and Gobo

7. POWERCON IN: Used to connect to supply power
8. FIRMWARE UPDRADE
9. POWER WITCH: Turn on/off the power
10. POWERCON OUT: Used to connect to next fixture
3.2 Animation/Color and Gobo
Animation Modules: Standard module, fixture default module.
CRI
Blue
Orange
Pink
Green
Red
ColorWheel
Animation
Gobo Modules: Optional module, carton does not include this part, the user can choose and
replace according to need (the standard module must be removed when replacing the optional
module).
CRI
Blue
Orange
Pink
Green
Red
DANGER!
Install the color wheel/gobo wheel with the device switched off only.
Unplug from mains before changing color wheel/gobo wheel!
CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be
opened!
7F