Page 68 of 80
9.0 LABEL INFORMATION (continued)
Keep burner and control compartment clean. See installation and operating instructions
accompanying appliance.
Sections of the venting system have not been installed. WARNING – Do not operate the
appliance until all sections have been assembled and installed in accordance with the
manufacturer’s instructions.
WARNING
Electrical Grounding Instructions
This appliance is equipped with a three prong (grounding) plug for your protection against shock
hazard and should be plugged directly into a properly grounded three prong receptacle. Do not cut or
remove the grounding prong from this plug.
Class IIIA-2
In Canada, also certified for installation in a bedroom or bedsitting room.
Termination Labels
ClassIIIA-1
Inca Metal Cutting’s Listed Vent Termination
Part #IMC1070A or IMC1070B
For Direct Vent Fireplace
Mfg. by Inca Metal Cutting Heating Products Ltd.
Unit 100 Sales and office #115 shipping
11091 Bridgeport Rd
Richmond BC, V6X 1T3
HOT
Class I
This side up
To Next Page
Loading...