Intex CS7110 User Manual

Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English
188
PO
S AVE THESE INSTRUCTIONS
English
Page 21
MAINTENANCE (continued)
3. Disconnect the 2 hoses from the Saltwater System, and assemble the cell cover (10) at
each side of the cell.
4. In a counter-clockwise motion, unscrew the collar of the copper electrode (5) and remove it
from the electrolytic cell (4). Lift up the copper electrode.
5. Pour kitchen grade vinegar into the cell to immerse the titanium plates. Then put the
copper electrode back in the cell, soak them for about one hour until no colored areas
remain.
6. Open one side of the cell cover (10), drain and properly dispose of the vinegar. Connect the
 hosewhichgoesfromthepooltothecell.Flushthecellwiththepoolwater.
7. Reverse steps 3, 4, 5 and 6 to reconnect the electrolytic cell.

Intex CS7110 Specifications

General

Brand	Intex
Model	CS7110
Category	Water System
Language	English