Page 2
(188PO) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English
188
PO
S AVE THESE INSTRUCTIONS
English
Page 20
MAINTENANCE
IMPORTANT
Unplug the power cord before cleaning your system. Also close the plunger valves
onyourpoolorinserttheblackhat-likeplugsinthestraineropeningtoprevent
waterspillage.Aftercompletingallmaintenancetasks,youmustplugthepower
cordbackinandopentheplungervalvesorremovetheplugs.
Flow Sensor Cleaning
1. In a counter-clockwise motion unscrew the collar of the flow sensor (7) and remove it from
the electrolytic cell conduit. See “Part Reference”.
2. If deposits and debris are seen on the surface of the flow sensor, then use a garden hose
to wash it off.
3. If flushing with water does not remove the deposits, use a plastic brush to clean the surface
and the hinge if necessary. Do not use a metal brush.
4. After the flow sensor has been inspected and cleaned, align the locator notch on the flow
sensor to the connection ridge in the conduit. Now turn the collar in a clockwise motion,
tightening the sensor back into its position. Do not overtighten.
Electrolytic Cell Cleaning
Theelectrolyticcellhasaselfcleaningfunctionincorporatedintotheelectroniccontrol's
programming. In most cases this self cleaning action will keep the cell working at optimum
efficiency.Ifthepoolwaterishard(highmineralcontent)thecellmayrequireperiodicmanual
cleaning. To maintain maximum performance, we recommend that you open and visually
inspect the electrolytic cell monthly. The following steps provide instructions on how to clean
your cell.
Inspection and cleaning:
1. Switch off the unit, unplug the power cord from the electrical socket.
2. For filter pumps with 1-1/4” (32mm) hose size - To prevent water from flowing out of the
pool, unscrew the strainer grids from the strainer connectors and insert the hat-like plugs
into the strainer connectors.
For filter pumps with 1-1/2” (38mm) hose size - Turn both plunger valve handles fully
clockwise until they stop. This closes the valve, prevents the water from flowing out of the
pool.
Connection Ridge
Locator Notch
Hinge
To Next Page
Loading...
Need help?
General
