EasyManua.ls Logo

Intex ECO 15110 - User Manual

Intex ECO 15110
35 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
261
PO
(261PO) Sand Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 07/23/2014
English
Sand Filter Pump &
Saltwater System with E.C.O.
(Electrocatalytic Oxidation)
Model ECO 20110 & 15110
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves the
right to change specifications and appearance, which may result in
updates to the instruction manual without notice.
OWNER’S MANUAL
For illustrative purposes only.
IMPORTANT!
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, Visit
www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacific Time
261-*PO-R0-1507

Table of Contents

Questions and Answers

  • J
    James SmithAug 17, 2025
    What to do if my Intex ECO 15110 filter doesn’t clean the pool?
    • H
      Howard GutierrezAug 17, 2025
      If your Intex Water Pump filter isn't effectively cleaning the pool, consider the following: * Ensure proper chlorine and pH levels. Adjust as necessary. * Make sure there is filtering media in the tank; load with filter sand. * Verify the 6-way valve setting position is set to “FILTER”. * If the pool is excessively dirty, operate the filter for longer periods. * If there is dirt or sand on the pool floor, use an Intex pool vacuum to clean the bottom of the pool. * If the basket is restricting the water flow, clean the basket.
  • M
    Miss Angel Martin DVMAug 21, 2025
    How to fix a leaking hose on my Intex ECO 15110?
    • J
      jenniferyangAug 21, 2025
      To fix a leaking hose on your Intex Water Pump: * Ensure the hose nut is securely tightened or reinstall it. * Check that the hose connection fitting o-ring/L-shape o-ring is in place and undamaged.
  • P
    Patricia ThompsonAug 25, 2025
    Why is the 6-way valve or cover leaking on my Intex Water Pump?
    • T
      Tara MarksAug 25, 2025
      If the 6-way valve or cover is leaking on your Intex Water Pump: * Remove the 6-way valve cover and ensure the o-ring is in place. * Clean the sand tank o-ring with garden hose water if it's dirty. * Tighten the flange clamp with the wrench supplied.
  • S
    Sheila WoodAug 28, 2025
    What does it mean if there are white flakes in the water when using Intex Water Pump?
    • G
      Gregory CalderonAug 28, 2025
      If you observe white flakes in the water while using your Intex Water Pump, it indicates excessive calcium hardness. To address this, drain about 20 to 25% of the pool water and add fresh water to decrease the calcium hardness. Also, inspect the electrolytic cell for scale buildup and clean it if necessary.
  • D
    Daryl StanleyAug 31, 2025
    Why does my Intex Water Pump have insufficient chlorine?
    • E
      Elizabeth MckinneyAug 31, 2025
      If your Intex Water Pump shows insufficient chlorine, consider these factors: * Chlorine loss may be due to intense sunlight exposure. Use a pool cover when the pool is not in use or when the unit is operating. * If the bather load has increased, increase the daily Saltwater System operating time. * A clogged or dirty electrolytic cell can cause this issue. Remove the cell for inspection and clean it if necessary. * High UV level exposure may be the cause. Cover the pool with a pool cover for 2 days with the device running, then test the water using the test strips.
  • J
    joskinnerSep 3, 2025
    Why is sand flowing back into the pool from my Intex ECO 15110?
    • D
      Daisy PerrySep 3, 2025
      If sand is flowing back into the pool from your Intex Water Pump: * Ensure you are using only No. 20 silica sand with a particle size range of 0.45 to 0.85 mm (0.018 to 0.033 inches) and a Uniformity Coefficient less than 1.75, as the sand may be too small. * The sand bed might be calcified; if so, change the sand.
  • A
    angela15Sep 10, 2025
    What to do if there is no LED display on my Intex Water Pump?
    • M
      mary19Sep 10, 2025
      If there is no LED display on your Intex Water Pump: * Ensure the cell cord is firmly plugged into the cell housing receptacle, as there may be no power supply. * Reset the RCD/GFCI, as it may not have reset.
  • J
    Joseph ClayNov 13, 2025
    Why is my Intex Water Pump filter not pumping water or the flow is very slow?
    • M
      michaelsnyderNov 13, 2025
      If your Intex Water Pump isn't pumping water or the flow is slow, consider these potential causes: * The inlet or discharge may be clogged. Clear any obstructions in the intake hose by discharging it inside the pool wall. * There might be an air leak on the intake line. Tighten hose nuts and check hoses for damage. Also, check the pool water level. * If the pool is excessively dirty, clean the pre-filtering basket more often. * The sand media could be clogged with dirt. Backwash the filter. * The nozzle and strainer connections might be reversed. Install the nozzle at the upper position of the pool inlet and the strainer at the lower position of the pool outlet. * There might be crusting or caking on the filtering sand surface. Remove about 1” of sand if necessary. * A pool ...

Summary

Essential Safety Instructions

Product Parts Identification

Key Product Specifications

Initial Setup Procedures

Motor Pre-filter Assembly

Assemble motor pre-filter housing, basket, and leaf trap.

System Operating Procedures

6-Way Valve Operation Guide

Explains 6-way valve settings, functions, and water flow directions.

Saltwater System Control Operations

Setting Operating Hours and Locking Controls

Set operating hours and lock control panel to prevent unauthorized changes.

Pool Water Volume and Salt Calculations

Cleaning and Maintenance

Motor Pre-filter Cleaning Steps

Clean motor pre-filter, basket, and leaf trap components.

Flow Sensor Cleaning Guide

Clean the flow sensor to ensure proper operation and performance.

Pool Chemistry Definitions and Maintenance

Long Term Storage and Winterization

Troubleshooting Guide

Common Pool Issues and Resolutions

General Pool Safety Guidelines

Product Limited Warranty Details

Intex ECO 15110 Specifications

General IconGeneral
ModelECO 15110
Frequency50 Hz
TypeSubmersible Water Pump
Voltage220 V
Cable Length10m
Suitable ForOpen Well

Related product manuals