EasyManua.ls Logo

Intex Happy Crab Easy Set Pool - Troubleshooting

Intex Happy Crab Easy Set Pool
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81PO
English
(81PO) HAPPY CRAB EASY SET POOL ENGLISH 4.875” X 7.25” 07/13/2020
S AVE THESE INSTRUCTIONS
Page 16
TROUBLESHOOTING
PROBLEM DESCRIPTION CAUSE SOLUTION
ALGAE
Greenish water.
Green or black
spots on pool liner.
Pool liner is slippery
and/or has a bad
odor.
Chlorine and pH
level need
adjustment.
Super chlorinate
with shock
treatment. Correct
pH to your pool
store’s
recommended level.
Vacuum pool bottom.
Maintain proper
chlorine level.
COLORED
WATER
Water turns blue,
brown, or black when
first treated with
chlorine.
Copper, iron or
manganese in water
being oxidized by
the added chlorine.
Adjust pH to
recommended level.
Run filter until water
is clear.
Replace cartridge
frequently.
FLOATING
MATTER IN
WATER
Water is cloudy or
milky.
“Hard water” caused
by a too high pH
level.
Chlorine content is
low.
Foreign matter in
water.
Correct the pH level.
Check with your pool
dealer for advice.
Check for proper
chlorine level.
Clean or replace your
filter cartridge.
CHRONIC LOW
WATER LEVEL
Level is lower than
on previous day.
Rip or hole in pool
liner or hoses.
Repair with patch kit.
Finger tighten all
caps.
Replace the hoses.
SEDIMENT ON
POOL BOTTOM
Dirt or sand on pool
floor.
Heavy use, getting in
and out of pool.
Use Intex pool
vacuum to clean
bottom of pool.
SURFACE
DEBRIS
Leaves, insects etc. Pool too close to
trees.
Use Intex pool
skimmer.
PROBLEM CAUSE SOLUTION
POOL INLET AIR
ADAPTOR
LEAKING
Hose clamps are not well-fitted. Tighten or reinstall hose clamps.
AIR JET VALVE
LEAKING
Air jet valve is not tight and
facing up.
Air jet valve internal seal blocked.
Air jet valve internal seal dirty.
Air jet valve broken.
Tighten air jet valve and make
sure it’s facing up.
Turn ON or plug in the pump and
run for few seconds, then turn
OFF or unplug, repeat 3 times.
Remove air jet valve, flush dirt
out with water and replace valve
back.
Replace a new air jet valve.

Related product manuals