Intex PureSpa SB-H20 Repair Guide

Page 12
The Control Panel connector is attached to the outer casing, lift the cover vertically carefully to ensure the
cable is not pulled and connection between base and cover is not damaged.
Accessing the PCB
Remove the 2 screws that secure the white PCB cover to reveal the PCB. Unscrew the 2 screws on the
holder to remove the PCB set from the Control Base.

Intex PureSpa SB-H20 Specifications

General

Control Panel	Digital
Air Jets	120
Brand	Intex
Type	Inflatable Hot Tub
Digital Control Panel	Yes
Seating Capacity	4 person
Water Capacity	210 gallons
Bubble Jets	120
Heating System	Yes
Cover	Included
Height	28 inches
Model	SB-H20