Intex PureSpa SB-H20 Repair Guide

Page 29
Random Display or 888
If the display is showing random numbers or all the LEDs are lit up, it is possible that there is a connection
problem.
In addition, disconnect and reconnect the cable for the Control Panel.
If reconnecting the Control Panel doesn’t work, try replacing the Control Panel with a new one.
If the above steps do not solve the issue, proceed with replacing the PCB. Refer to the section replacing
the PCB for more details.
No
END
Random Display/ Code 888
Yes
1. Replace Control Panel
2. Replace PCB
Go Back to Next Step
Random Code?

Intex PureSpa SB-H20 Specifications

General

Control Panel	Digital
Air Jets	120
Brand	Intex
Type	Inflatable Hot Tub
Digital Control Panel	Yes
Seating Capacity	4 person
Water Capacity	210 gallons
Bubble Jets	120
Heating System	Yes
Cover	Included
Height	28 inches
Model	SB-H20