EasyManuals Logo

Intex PureSpa SJB-HS-20-1C User Manual

Intex PureSpa SJB-HS-20-1C
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
299
A
S AVE THESE INSTRUCTIONS
(299IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 06/30/2016
English
Page 5
CAUTION
Maintain water chemistry in accordance with manufacturer’s instructions.
1.
Press the
RESET
button on the RCD.
2.
Turn on the spa electrical equipment.
3.
Press the
TEST
button on the RCD. The RCD indicator should
turn off and the electrical equipment should shut off. If the RCD
indicator does not turn off, and the electrical equipment does not
shut off, the RCD is faulty. Do not use the spa. Contact a quali ed
electrician to correct the fault.
4.
Press the
RESET
button on the RCD. The indicator on the RCD
should turn on. If the RCD indicator does not turn on, the RCD is
faulty. Do not use the spa. Contact a quali ed electrician
immediately to correct the fault.
WARNING
TEST
RESET
RESET
TEST
TEST
RESET
RESET
TEST
TEST
Always keep plug dry, plug in with wet plug is de nitely forbidden!
The plug of SPA must be directly connected only to a earthed socket-outlet from a xed electrical
installation.
To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter
plugs to connect unit to electrical supply; provide a properly located outlet.
Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
Do not leave the spa empty for extended period of time. Do not expose the spa to direct sunlight for
extended period of time.
When the appliance is not in use for long period of time, such as in the winter, the spa set should be
disassembled and stored indoor.
Do not allow the water in the spa to freeze. Do not turn on the spa when the water is frozen.
Do not use the spa if damaged in delivery and/or malfunctioning in any fashion. Contact the Intex
service center for further direction.
Never use the spa alone or allow others to use the spa alone.
Never pour water with a temperature higher than 40°C (104°F) into the spa directly.
Keep all pets away from spa to avoid any damage.
Do not add bath oil or bath salt to the spa water.
The spa must be setup on a level, at and smooth surface that is capable of supporting the maximum
load of the lled spa with four adult occupants: weight 2500 lbs (1136 kg); six adults: 3500 lbs (1592 kg).
Provide adequate drainage system around the spa to deal with over ow water and splashes.
WARNING
This product is provided with a RCD located at the end of the power cord. The RCD must be tested
before each use. Do not use the spa if the RCD does not function properly.
Disconnect the power cord until the fault has been identi ed and corrected. Contact a quali ed
electrician to correct the fault. Do not bypass the RCD. There are no serviceable parts inside the
RCD. Opening the RCD will void the warranty.

Other manuals for Intex PureSpa SJB-HS-20-1C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex PureSpa SJB-HS-20-1C and is the answer not in the manual?

Intex PureSpa SJB-HS-20-1C Specifications

General IconGeneral
BrandIntex
ModelPureSpa SJB-HS-20-1C
CategorySwimming Pool
LanguageEnglish

Related product manuals