Intex PureSpa SJB-HS-22

Other manuals for Intex PureSpa SJB-HS-22

Questions and Answers:

K
Kristin FergusonSep 5, 2025
What causes insufficient chlorine in my Intex PureSpa SJB-HS-22 Swimming Pool and how to fix it?
- K
  Kimberly PerezSep 5, 2025
  If there is insufficient chlorine in your Intex Swimming Pool, increase the sanitation system operating time and ensure the heater is off during the sanitation process. Use a spa cover when the spa is not in use or when the sanitation system is operating to prevent chlorine loss due to sunlight. If the bather load has increased, increase the sanitation system operating time and test the water using test strips. Also, check and clean the electrolytic cell if it's clogged or dirty.
F
Francisco TaylorSep 6, 2025
How to stop leaking between spa tub and control unit connectors in my Intex PureSpa SJB-HS-22 Swimming Pool?
- A
  Angela LoveSep 6, 2025
  If there's leaking between the spa tub connectors and control unit connectors on your Intex Swimming Pool, tighten the inlet and outlet connections. Also, check if the spa control base inlet/outlet o-ring is missing or dirty; if so, coat the o-ring with petroleum jelly for a waterproof seal.
D
David BallardSep 6, 2025
Why is the jet air control knob not working on my Intex PureSpa SJB-HS-22?
- B
  butlerjulieSep 6, 2025
  If the jet air control knob isn't working on your Intex Swimming Pool, start by cleaning any dirt inside the jet nozzles. Ensure the jet air hose in the control panel is not damaged and securely attached, replacing it if needed. If the jet airflow plumbing inside the spa tub is damaged, contact an Intex Service Center.
A
Adam DiazSep 6, 2025
Why is my Intex PureSpa SJB-HS-22 Swimming Pool so noisy only in filtration mode?
- S
  Sherry MendozaSep 7, 2025
  If your Intex Swimming Pool is too noisy in filtration mode, ensure the control panel, back cover, and all inlet/outlet connections are securely attached. Make sure the ground is level, firm, and smooth. If the spa filter motor has failed, replace it with a new one.
M
Mr. Nicholas DuffySep 7, 2025
What should I do if the bubble air blower does not work on my Intex Swimming Pool?
- B
  Brandi BauerSep 7, 2025
  If the bubble air blower on your Intex Swimming Pool isn't working, the air blower pump might be too hot. Turn off and unplug the spa, let it cool down, and then restart it.