354
PO
SAVE THESE INSTRUCTIONS
(354PO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/18/2021
English
Page 5
* If this pump was not purchased as part of a pool set, the above parts can be ordered at
www.intexcorp.com if needed.
When ordering parts, be sure to quote the model number and part numbers.
REF. NO. DESCRIPTION QTY. SPARE PART NO.
1 PRESSURE GAUGE 1 13078
2 TANK COVER & 4-WAY VALVE SET 1 13079
3 DRAIN OUTLET COVER 1 13080
4 CLAMP ASSEMBLY 1 13081
5 TANK O-RING 1 13083
6 HOSE O-RING 5 12947
7 CENTER PIPE WITH FILTER GRID 1 13084
8 SAND FILTER PUMP TANK 1 13082
9 DRAIN VALVE CAP 1 11456
10 DRAIN VALVE O-RING 1 11385
11 SAND FILTER PUMP TANK BASE 1 13085
12 HOSE 2 10116
13 SAND FILTER INTERCONNECETING HOSE 1 13086
14 AIR RELEASE VALVE 1 10725
15 AIR RELEASE VALVE O-RING 1 10264
16 CLAMP PIN 1 11726
17 CLAMP SCREW 1 11727
18 HOSE CLAMP 6 11489
19 PUMP MOTOR 1 13089EG
20* STRAINER CONNECTOR 1 11070
21* STRAINER GRID 1 12197
22* INLET STRAINER CONNECTOR 1 12365
23* POOL INLET JET NOZZLE 1 12364
24* POOL INLET AIR ADAPTOR 1 12368
25* AIR JET VALVE 1 12363
26* AIR JET VALVE CAP 1 12373
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
To Next Page
Loading...
Need help?
General
