Invacare A4 - Page 60

A4™AND A4™TITANIUM 60 Part No. 1110545
FOOTREST
FOOTPLATE ANGLE ADJUSTMENT
1. Loosen, but do not remove the four locknuts that secure the footplate to the two
footrest tubes.
2. Position the footplate to the necessary angle to accommodate the user.
3. Retighten the four locknuts.
FOOTPLATE DEPTH ADJUSTMENT
1. Note the height of the footrest and the angle of the footplate for reinstallation.
2. Loosen, but do not remove the two allen screws securing the footrest tubes to the
wheelchair frame.
3. Remove the two footrest tubes from the wheelchair frame.
4. Loosen, but do not remove the four locknuts that secure the footplate to the
footrest tubes.
5. Remove the footrest tubes from the footrest.
6. Insert the footrest tubes into one of two depth mounting positions to
accommodate the user.
7. Adjust the angle of the footrest plate to the position noted in STEP 1.
8. Tighten the four locknuts that secure the footplate to the footrest tubes.
9. Insert the footrest tubes into the wheelchair frame.
10. Adjust the footrest tubes to the height noted in STEP 1.
11. Tighten the two allen screws to secure the footrest tubes to the wheelchair frame.
FOOTREST
SECTION 6