Invacare
®
Meteor Service Manual
10
2.4 Before operation / after completion of service work:
Caution:
Check all fixings for tight fit. Check all parts for correct interlocking. Only op-
erate the wheelchair with correct tyre pressure (2.0 bar).
Always carry out a functional test of any components replaced in addition to a
trial run after completing any service work.
2.5 Tool list
You will need a standard tool set with at least the following:
§ set of open and ring spanner
§ set of Allen keys
§ torque wrench (commercial)
§ socket spanner set
§ set of screwdrivers (flat, Phillips and Torx)
§ oblique pliers
§ flat-nosed pliers
§ circle pliers
§ pointed pliers
§ cable lug pliers
§ wooden or plastic hammer
§ tyre repair kit (commercial)
§ tyre pressure indicator
§ air pump
§ valve removal tool
§ internal remover and insertion or impact tool for ball bearings
§ Multimeter with probes and various cable clips
§ soldering iron 30 W
§ pop riveting tool
To Next Page
Loading...
Need help?
General