Invacare meteor - Stub Axle; Transverse Control Arm

Service Manual Invacare
®
Meteor
47
7.7.4 Stub axle
Disassembly
1. Dismantle the front panelling (see section 7.3.2).
2. Remove the front wheel (see section 7.4).
3. Dismantle the steering linkage (see section 7.7.3.
4. Remove the nut from the bolted connection.
5. Remove the nut, collar and the hex bolt.
6. Remove the stub axle.
Reassembly
1. Reassembly takes place in reverse order to disas-
sembly.
7.7.5 Transverse control arm
ü NOTE:
When disassembling or reassembling a transverse control arm, both control arms are af-
fected when loosening or tightening the internal bolted connection!
Disassembly of the transverse control arm
1. Dismantle the shock absorber (see section 7.7.1).
2. Dismantle the steering linkage (see section 7.7.3).
3. Dismantle the stub axle (see section 7.7.4).
4. Loosen the nut on the outside assembly eye.
5. Remove the nut and the Allen screw.
6. Loosen the nut on the inside assembly eye.
7. Remove the nut and the Allen screw.
8. Remove the transverse control arm.