Service Manual Invacare
®
Meteor
51
7.10 Drive
CAUTION:
Make sure you have blocked the vehicle up securely before working.
The ground clearance must be at least 150 mm in order to be able to
remove the drive. Please note the high drive unit weight, risk of crush-
ing! Always carry out a functional test and trial run after service work
on the drive. Risk of accidents!
CAUTION:
Remove the battery fuses in accordance with the operating manual.
7.10.1 Disassembly
ü NOTE:
Note down the position of the cable plugs on the
electronics box.
1. Dismantle the rear panelling (see section 7.3.3).
2. Remove the drive cable plugs.
3. Dismantle the drive wheels (see section 7.4).
4. Loosen the axle fixing and bearing bolted connec-
tions.
5. Remove the Allen screws, washers and nuts.
6. Remove the axle mounting bracket.
7. Remove the drive unit.
To Next Page
Loading...
