To Next PageTo Next PageWhat to do if my Invacare Medical Equipment has no power?
If your Invacare Medical Equipment isn't receiving power, first ensure the control unit is switched on and properly connected to a functioning power source. Check that the power cord is securely plugged in. If there's a power outage, wait for the power to be restored. Also, inspect the fuse and replace it with an equivalent one if it's blown.
Why is my Invacare Medical Equipment mattress not inflating or alternating properly?
If your Invacare Medical Equipment mattress is not inflating or alternating properly, check the following: * Ensure the mattress hose is correctly connected and locked in place. * Inspect the air hose for kinks or splits; unkink it or replace it if damaged. * Check the air cushions or overlay pad for major leaks and replace them if necessary. * Examine the manifold for kinks or splits; unkink it or replace it if damaged. * If the control unit doesn't power on despite having power and a good fuse, send the unit back for repair. * If the mattress isn't alternating due to a solenoid or valve malfunction, send the control unit back to the factory for repair. * If there's no air due to a pump or blower malfunction, send the unit for repair.
General| Brand | Invacare |
|---|---|
| Model | MicroAir MA95Z |
| Category | Medical Equipment |
| Language | English |
Instructions for safe use and understanding warnings, cautions, and instructions for the product.
Highlights DANGER-EXPLOSION HAZARD and CAUTION labels regarding grounding and electrical shock.
Displays warnings about patient entrapment and filter maintenance.
Warns about the serious risk of patient entrapment with bed side rails and mattress fit.
Details fire hazards from smoking/oxygen and electrical shock risks, including grounding.
Step-by-step instructions for securely attaching the powered mattress to the bed frame.
Provides instructions for connecting the air hose to the control unit for both MA90Z and MA95Z models.
Instructions for connecting the hospital grade power cord to the control unit and wall outlet, with safety warnings.
Instructions on how to disconnect the air hose and CPR connector for emergency CPR procedures.
Provides visual details on disconnecting hose connectors and the RED CPR connector for MA90Z.
Lists common problems like mattress not inflating or not alternating, with their causes and solutions.
Addresses issues related to the unit not receiving power, including checking connections and fuses.
