What to do if my Invacare ML6 has no flow?
If your Invacare Medical Equipment has no flow, make sure the flow dial isn't set to “0”. Adjust it to the prescribed setting. Also, check if the cylinder is empty and fill or replace it if needed. Ensure the flow dial is set correctly, so the indicator points to a setting. Check the cannula for kinks or blockages. Finally, make sure the toggle valve is open.
Why does my Invacare Medical Equipment have no flow?
The flow may stop in your Invacare Medical Equipment because: 1. The flow dial is at setting “0”. To resolve this, adjust flow dial to prescribed setting. 2. The cylinder is empty. To resolve this, fill or replace cylinder. 3. The flow dial is between settings. To resolve this, set dial so indicator points to a setting. 4. The cannula is kinked or blocked. To resolve this, check to see if the cannula is kinked. 5. The toggle valve is closed. To resolve this, slowly open toggle valve.
General| Weight Capacity (kg) | 136 kg |
|---|---|
| Weight Capacity | 300 lbs |
| Seat Width | 16, 18, 20 inches |
| Seat Depth | 16 inches |
| Overall Length | 39 inches |
| Footrest Type | Swing-away |
| Overall Width | 24" |
To Next Page