To Next PageTo Next PageWhat to do if my Invacare Medical Equipment has no power?
If your Invacare Medical Equipment isn't receiving power, first ensure the control unit is switched on and properly connected to a functioning power source. Check that the power cord is securely plugged in. If there's a power outage, wait for the power to be restored. Also, inspect the fuse and replace it with an equivalent one if it's blown.
Why is my Invacare Medical Equipment mattress not inflating or alternating properly?
If your Invacare Medical Equipment mattress is not inflating or alternating properly, check the following: * Ensure the mattress hose is correctly connected and locked in place. * Inspect the air hose for kinks or splits; unkink it or replace it if damaged. * Check the air cushions or overlay pad for major leaks and replace them if necessary. * Examine the manifold for kinks or splits; unkink it or replace it if damaged. * If the control unit doesn't power on despite having power and a good fuse, send the unit back for repair. * If the mattress isn't alternating due to a solenoid or valve malfunction, send the control unit back to the factory for repair. * If there's no air due to a pump or blower malfunction, send the unit for repair.
General| Brand | Invacare |
|---|---|
| Model | microAIR MA90 Series |
| Category | Medical Equipment |
| Language | English |
Information and warnings about the risk of patient entrapment with bed rails.
Details on fire, explosion, and electrical shock hazards and preventative measures.
Step-by-step instructions for installing the replacement mattress system onto the bed frame.
Overview of the control panel layout and button functions for operation.
Detailed explanation of the specific buttons and their functions for MA90Z and MA95Z models.
Step-by-step guide for positioning the patient onto the mattress for optimal use.
Steps to prepare the system for emergency CPR response by disconnecting airflow.
A guide to identifying and resolving common problems with the system.
