28
4.3 Swinging the kerb climber rearward to get in and out of the
powerchair
• Pull the handle (1) all the way forward. The
kerb climber swings away towards the back
and locks in place in this position.
• To bring the kerb climber back towards the
front, push the handle (1) rearward.
Getting into the wheelchair:
• Position your wheelchair as close as possible to your seat. This might
have to be done by an attendant.
• Switch your wheelchair off.
• Apply the manual wheel lock of your wheelchair (if existing).
• Detach the skirt guard of your wheelchair or swivel it up.
• Now slide into the wheelchair.
To Next Page
