Invacare MK5 NX-80 ELECTRONICS - Standard Value Settings

Part No. 1122140 8-13 MK5
™
NX
™
- 80 ELECTRONICS
Press the SELECT key. The following screen will appear:
MOVE JOYSTICK TO
FORWARD _ REVERSE _
LEFT _ RIGHT _ AND
THEN NEUTRAL _
Move the joystick the desired distance or displacement from neutral for full speed
travel. When an acceptable minimum distance is reached, the space to the right of the
displacement direction will be filled in. Continue moving the joystick to the desired full
speed travel displacement for the other three directions.
MOVE JOYSTICK TO
FORWARD  REVERSE 
LEFT  RIGHT  AND
THEN NEUTRAL _
When all four direction spaces are filled in, let the joystick drop into its neutral position.
A programmed delay of one (1) second or more occurs before all values are accepted.
This is indicated when the NEUTRAL space fills automatically. The screen then returns
to the previous menu. Save the values in the drive program.
SERVICE SECTION III
STANDRAD VALUE SETTINGS
STANDARD VALUE SETTINGS
III. STANDARD VALUE SETTINGSIII. STANDARD VALUE SETTINGS
III. STANDARD VALUE SETTINGSIII. STANDARD VALUE SETTINGS
III. STANDARD VALUE SETTINGS
The standard value settings are available as a reference point for initial set-up of the
chair, for final user setting or whenever major changes have been made in the perfor-
mance and a known starting point needs to be reestablished.
A selection of seven proportional and programs are available. Select STANDARD
VALUES from the main menu to display the standard value menu. Press  or  to
select the standard program to be placed in the temporary memory. Press the SAVE key
to store the program into a selected drive. Then make changes to specific functions as
needed. The general capabilities of the standard programs are listed below:
INDOOR JOYSTICK AVE. - An indoor program for the average joystick user.
MODERATE OUTDOOR - A medium speed program for rougher terrain.
SPEED/LEVEL TERRAIN - A high speed program for flat, smooth, hard surfaces.
RAMPS AND CURBS MODE - A medium speed program for maneuvering on
ramps and climbing curbs.
INDOOR LEARNER - A learning or indoor performance settings.
VERY SLOW DRIVING - Very slow driving performance.
TREMOR DAMP MODE - A spasticity program.