To Next PageTo Next Page
Need help?Do you have a question about the Invacare MK5 NX-80 ELECTRONICS and is the answer not in the manual?
Warnings about operating without understanding the manual and contacting professionals if needed.
Setup and fine-tuning of the Electronic Controller require Invacare certification.
Recommended warnings to minimize risk of EMI interference with the control system.
Details the ON/OFF switch, speed control, joystick, and battery gauge display.
Emphasizes that controller setup requires Invacare certification to avoid warranty voiding.
Performance adjustments must be performed by qualified professionals.
Explains the programmer's role in performance modification, diagnostics, and calibration.
Lists common adjustable performance parameters accessible via the menu.
Process for saving changes to temporary memory into a drive program.
Factory calibration is standard; recalibration needed for module/joystick replacement.
Details on calibrating Battery Level, Motor Balance, Brake Time-Out, Drive Config, and Soft Start.
Accessing and interpreting fault codes for troubleshooting.
Details on network connections, software version, battery status, drive lockout, rollback, temperature, and readiness.
How faults are indicated by the joystick BDI and Remote Programmer.
A detailed list of diagnostic codes and their specific causes.
Definition of current rollback as a system protection feature against overheating.
Addresses common user errors and provides advice on proper charging and operation.
Warnings about operating without understanding the manual and contacting professionals if needed.
Setup and fine-tuning of the Electronic Controller require Invacare certification.
Recommended warnings to minimize risk of EMI interference with the control system.
Details the ON/OFF switch, speed control, joystick, and battery gauge display.
Emphasizes that controller setup requires Invacare certification to avoid warranty voiding.
Performance adjustments must be performed by qualified professionals.
Explains the programmer's role in performance modification, diagnostics, and calibration.
Lists common adjustable performance parameters accessible via the menu.
Process for saving changes to temporary memory into a drive program.
Factory calibration is standard; recalibration needed for module/joystick replacement.
Details on calibrating Battery Level, Motor Balance, Brake Time-Out, Drive Config, and Soft Start.
Accessing and interpreting fault codes for troubleshooting.
Details on network connections, software version, battery status, drive lockout, rollback, temperature, and readiness.
How faults are indicated by the joystick BDI and Remote Programmer.
A detailed list of diagnostic codes and their specific causes.
Definition of current rollback as a system protection feature against overheating.
Addresses common user errors and provides advice on proper charging and operation.
General| Brand | Invacare |
|---|---|
| Model | MK5 NX-80 ELECTRONICS |
| Category | Control Systems |
| Language | English |
