Invacare MK5 NX-80 ELECTRONICS - MAKING PERFORMANCE ADJUSTMENTS; Navigating Performance Settings; Adjusting Performance Parameters

Part No. 1122140 8-9 MK5
™
NX
™
- 80 ELECTRONICS
MAKING PERFORMANCE ADJUSTMENTS
The arrow to the left is the selection pointer. It can be moved up or down the main
menu by pressing the  or  key. The selection arrow points to PERFORMANCE
ADJUST. To select this activity press the SELECT key.
 PERFORMANCE ADJUST
STANDARD PROGRAMS
CALIBRATIONS
CURRENT STATUS
The display screen changes to show the first four performance functions and the pro-
grammed values for the functions. The selection arrow points to the first function.
Pressing the  or  key will move the
selection arrow up or down.
 FORWARD SPD 95%
TURNING SPD 50%
ACCELERATION 30%
TURN ACCELERATION 35%
Move the selection arrow down to TURNING SPD by pressing the  key.
FORWARD SPD 95%
 TURNING SPD 50%
ACCELERATION 30%
TURN ACCELERATION 35%
Move the selection arrow down to ACCELERATION by pressing the  key again.
FORWARD SPD 95%
TURNING SPD 50%
 ACCELERATION 30%
TURN ACCELERATION 35%
Move the selection arrow to TURN ACCELERATION by pressing the  key again.
FORWARD SPD 95%
TURNING SPD 50%
ACCELERATION 30%
 TURN ACCELERATION 35%
Pressing the  key again leaves the selection arrow in the same place and the entire
performance menu shifts up one line. The selection arrow now points to BRAKING.
TURNING SPD 50%
ACCELERATION 30%
TURN ACCELERATION 35%
 BRAKING 35%
To change the programmed value for TURN ACCELERATION, press the  key so the
selection arrow points to TURN ACCELERATION.
TURNING SPD 50%
ACCELERATION 30%
 TURN ACCELERATION 35%
BRAKING 35%
SERVICE SECTION IIPERFORMANCER ADJUSTMENTS
PERFORMANCE ADJUSTMENTS