9
1.4 Activating / deactivating the immobilizer
Activating the immobilizer
• Switch on the remote.
• Use the end of the magnetic key (Invacare® Logo) to move over the
sensor area (1) on the remote (key symbol). The horn will sound
briefly once. The remote shuts down automatically. The immobilizer
is activated.
Deactivating the immobilizer
• Switch on the remote. The status display will flash red slowly.
• Use the end of the magnetic key (Invacare® Logo) to move over the
sensor area (1) on the remote (key symbol).
Immobilizer
Magnetic key
To Next Page
Loading...
