This area will show the set tempe-
rature.
DIGITAL display:
23
Press FAN button to select the
desired fan speed setting(AUTO-
Low-Med-High).Your selection will
be displayed in the LCD windows,
except the AUTO fan speed.
FAN SPEED display:
25
is displayed when pressing
the
up & down swing
button.
Press this button again to clear the
display.
18
Up & down swing icon:
After pressing TIMER button, ON
or OFF will blink.This area will
show the set time.
SET TIME display:
21
SLEEP icon :
is displayed by pressing
the SLEEP button. Press this
button again to clear the display.
16
n
is displayed when pressing the
ottub siht sserP.nottub OBRUT
again to clear the display.
TURBO icon:
22
is displayed when pressing the
X-FAN button. Press this button
again to clear the display.
X-FAN icon:
24
15
16
20
23
24
22
25
17 18 19
21
MODE icon:
If MODE button is pressed,
current operation mode icon
(AUTO), ( COOL),
(DRY), (FAN) or (HEAT
is only for heat pump models) will
15
show.
LIGHT icon:
is displayed by pressing the
LIGHT button.Press LIGHT button
again to clear the display.
19
LOCK icon:
20
is displayed by pressing "+" and
"-" buttons simultaneously. Press
them again to clear the display.
- 8 -
Operation of Remote Controller
Pressing TEMP button,
(set temperature),
ambient temperature)
(outdoor ambient temperature)
and blank is displayed circularly.
(indoor
TEMP icon:
17
NOTE: “ ” function is applicable
to partial of models.
To Next Page
Loading...
