EN
5
|Warnings (for using R290/R32 refrigerant only)
-Do not use any other means other than the recommended to expedite the defrosting process or
to perform a cleaning of the unit, other than those recommended by the manufacturer.
- This device should never be stored in an area in combination with other ignition sources (for
example: a gas appliance an electrical heater, open ames etc.)
- Do not attempt to penetrate the unit with a tool or try to burn
- Be extra cautious as refrigerant gas may be odorless.
-Appliance for 9000Btu/h should be installed, operated and stored in a room with a oor area
larger than 9 m
2
.
- It is necessary to always comply with national gas regulations.
- Keep air ventilation clear of any obstructions
- The unit should be placed in storage in such a manner as to prevent any mechanical damage from
occurring.
- Always operate this unit in a well-ventilated area, where the room size corresponds to the
specications of the device for optimal performance.
-Any persons involved with the operation and handling of the refrigerant circuit of this unit,
should be certied by the related accredited industry, and authorized as competent to handle
refrigerants, safely, and in accordance to the safety standards of the industry.
- Servicing should be performed only by a certied technician as per the Mnaufacturers
reccomendations. Any maintenance or repair required, should be performed by skilled personnel
who are competent in the use of ammable refrigerants.
IMPORTANT NOTE: Please read this manual carefully prior
to installing and operating your device! It is recommended
to keep this manual for future reference.
Caution: Risk of re/ ammable
materials (Required for R32/
R290 units only)
Description of displayed Symbols (*Only applicable to units with R32/R290 Refrigerant)
WARNING This symbol indicates the use of a ammable refrigerant. If any leakage
occurs, or if exposed to an external ignition source, a re risk is possible.
CAUTION This symbol indicates that the user’s manual should be read carefully.
CAUTION This symbol indicates that a professional service technician should handle
this unit with reference to the user’s manual
CAUTION This symbol indicates the presence of a user’s or installation manual