10
How to use the buttons
7
1
2
3
7
1
2
3
Cooling /Heating Operation
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the MODE button to select COOL,
HEAT(cooling & heating models only) mode.
3. Press the UP/DOWN buttons to set the desired
temperature. The temperature can be set within a
range of 17°C~ 30°C in 1 °C increments.
NOTE
In the FAN mode, the setting temperature is not displayed
in the remote controller and you are not able to control
the room temperature either. In this case, only step 1, 3
and 4 may be performed.
Fan Operation
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the FAN button to adjust the fan
speed in a sequence of following: AUTO,
20%,40%,60%,80%,100%.
Fan speed can also be adjusted with the up/down
button.
1. Press the FAN button.
2. Press the UP/DOWN buttons to set the desired fan
speed.Each time you press the UP/DOWN buttons,
the fan speedcan be set within a range of 1%~ 100%
in 1% increments.
To Next Page
Loading...
Need help?
General
