11
Dehumidifying operation
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the
indoor unit starts ashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired
temperature. The temperature can be set within a
range of 17°C~ 30°C in 1°C increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch the fan
speed. It has already been automatically controlled.
Adjusting air ow direction
Use the SWING1 & SWING2 button to adjust the
desired airow direction.
1. Upside air ow direction can be adjusted with the
SWING1 button on the remote controller.
When you press the button, the upside louver will
swing left and right automatically. Press this button
again can stop moving.
2. Downside airow direction can be adjusted with the
SWING2 button on the remote controller. When you
press the button, the downside louver will swing left
and right automatically. Press this button again can
stop moving.
NOTE
When the louver swing or move to a position which would
aect the cooling or heating eect of the air conditioner, it
would automatically change the swing/moving direction.
How to use the buttons
7
1
2
9
10
To Next Page
Loading...
Need help?
General
