13
To set the Auto-o time.
1. Press the TIMER button until the Timer o indicator
“ ” displays and ashes, the last Auto-o setting
time and the signal “h” will be shown on the LCD
display area. Now it is ready to reset the Auto-o
time to STOP the operation.ady to reset the Auto-o
time to stop the operation.
2. Push the
p
or
q
button to set desired Auto-o
time. Each time you press the button, the time
increases/decreases by half an hour between 0 and
10 hours and by one hour between 10 and 24 hours.
3. Once the desired time establishes ,there will be
three seconds delay before the remote controller
transmits the signal to the air conditioner. Then,the
signal “h” will disappear, Timer o indicator will
remain on and the set temperature will re-appear
on the LCD display window.
11
How to use the buttons
To Next Page
Loading...
Need help?
General
