5
Operation of buttons
6
SLEEP Button
It can maintain the most comfortable temperature and
save energy. This function is available on COOL, HEAT
or AUTO mode only .
For the detail, see sleep operation in USER S MANUAL.
NOTE: While the unit is running under SLEEP mode,
it would be cancelled if MODE, FAN SPEED or ON /OFF
button is pressed.
7
UP Button(
p
)
Push this button to increase the indoor temperature
setting in 1°C increments to 30°C.
Push this button to increase the fan speed in a range
of 1% to 100% after pressing the FAN button.
DOWN Button(
q
)
Push this button to decrease the indoor temperature
setting in 1°C increments to 17°C.
Push this button to decrease the fan speed in a range
of 1% to 100% after pressing the FAN button.
NOTE: Temperature contol is not available in Fan mode.
8
SHORTCUT Button
Used to restore the current settings or resume
previous settings.
On the rst time connecting to the power, if push
the SHORTCUT button, the unit will operate on AUTO
mode, 26ºC, and fan speed is Auto
Push this button when remote controller is on,
the system will automatically revert back to the
previous settings including operating mode, setting
temperature, fan speed level and sleep feature(if
activated).
If pushing more than 2 seconds, the system will
automatically restore the current operation settings
including operating mode, setting temperature, fan
speed level and sleep feature(if activated ).
1
2
4
3
8
9
7
5
6
10
11
12
13
To Next Page
Loading...
Need help?
General
