INVENTOR V7CI-24WiFiR/U7RS-24

37
10
ECO/GEAR function
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
Press this button to enter the energy efficient mode in a sequence of
following:
ECO GEAR(75%) GEAR(50%) Previous setting mode ECO......
Note:This function is only available under COOL mode.
ECO operation:
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
50%(up to 50% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between
electical energy consumption and set temperature.
Functia ECO / GEAR
Apasati acest buton pentru a intra in modul ecient de energie
prin urmatoarea succesiune de butoane:
ECO

GEAR (75%)

GEAR (50%)

Απενεργοποίηση
εξοικονόμησης ενέργειας

ECO...
Nota: Functia este disponibila numai in modul COOL.
Functia ECO:
In modul de racire, apasati acest buton. Telecomanda va regla automat temperatura la
24°C / 75°F, viteza ventilatorului Auto pentru a economisi energie (numai atunci cand
temperatura setata este mai mica de 24°C / 75°F). Daca temperatura setata este de peste
24°C / 75°F, apasati butonul ECO, viteza ventilatorului se va schimba pe Auto, temperatu-
ra setata va ramane neschimbata.
NOTA:
Apasand butonul ECO, modicati modul sau reglati temperatura setata la mai putin de
24°C / 75°F va opri functionarea ECO.
In timpul functionarii ECO, temperatura setata trebuie sa e de 24°C / 75°F sau mai mare,
altfel poate duce la o racire insucienta. Daca simtiti inconfort, apasati din nou butonul
ECO pentru a-l dezactiva.
Functia GEAR:
Apasati butonul ECO / GEAR pentru a intra in modul de operare GEAR dupa cum urmea-
za: 75% (pana la 75% consum de energie electrica)
50% (pana la 50% consum de energie electrica)
Mod de setare anterior.
In timpul functionarii GEAR, asajul de pe telecomanda va alterna intre consumul de
energie electrica si temperatura setata.
10
ECO/GEAR function
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
Press this button to enter the energy efficient mode in a sequence of
following:
ECO GEAR(75%) GEAR(50%) Previous setting mode ECO......
Note:This function is only available under COOL mode.
ECO operation:
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
50%(up to 50% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between
electical energy consumption and set temperature.
10
ECO/GEAR function
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
Press this button to enter the energy efficient mode in a sequence of
following:
ECO GEAR(75%) GEAR(50%) Previous setting mode ECO......
Note:This function is only available under COOL mode.
ECO operation:
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
50%(up to 50% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between
electical energy consumption and set temperature.