INVENTOR V7CI-24WiFiR/U7RS-24

49
Verwendung der erweiterten Funktionen
Taste “Vane” drücken
Flügelzellenfunktion
Drücken Sie diese Taste, um die Funktion zur Einstellung der Lamellen zu aktivieren. jedes Mal, wenn Sie
die Taste Lamellen drücken, zeigt das Anzeigefeld die ausgewählten Lamellen in der Reihenfolge an (“-0”
zeigt an, dass vier Lamellen ausgewählt sind):
LED-ANZEIGE
LED-Taste drücken
Drücken Sie diese Taste zum Ein- und Ausschalten
des Anzeigefeldes am Innengerät.
How to Use Advanced Functions
Swing function
LED DISPLAY
Press Swing button
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
2s
Press this button to turn on and turn off
the display on the indoor unit.
Press LED button
Swing
LED
Swing
09
How to Use Advanced Functions
LED DISPLAY
Press this button to turn on and turn off
the display on the indoor unit.
Press LED button
LED
Swing function
Vane function
Press Swing button
The horizontal louver auto swing feature is
energized.
Press again to make it stop.
Swing
Press Vane button when the unit is turned on.
Press this button to activate the louver setting feature.Each time you press the Vane button button,
the display panel will display the selected louver in an order as(“-0” indicates that four louvers are all
selected):
Press Swing button to start/stop the auto swing feature of the selected louvers.
The system will exit the
louver setting mode If
there is no operations
during a 10 seconds
period.
-1
-2
-3
-4
-0
Vane
4 Louvers
Drücken Sie die Taste Swing, um die automatische Schwenkfunktion der ausgewählten Lamellen zu
starten/stoppen.
09
How to Use Advanced Functions
LED DISPLAY
Press this button to turn on and turn off
the display on the indoor unit.
Press LED button
LED
Swing function
Vane function
Press Swing button
The horizontal louver auto swing feature is
energized.
Press again to make it stop.
Swing
Press Vane button when the unit is turned on.
Press this button to activate the louver setting feature.Each time you press the Vane button button,
the display panel will display the selected louver in an order as(“-0” indicates that four louvers are all
selected):
Press Swing button to start/stop the auto swing feature of the selected louvers.
The system will exit the
louver setting mode If
there is no operations
during a 10 seconds
period.
-1
-2
-3
-4
-0
Vane
4 Louvers
Schwenkfunktion
09
How to Use Advanced Functions
LED DISPLAY
Press this button to turn on and turn off
the display on the indoor unit.
Press LED button
LED
Swing function
Vane function
Press Swing button
The horizontal louver auto swing feature is
energized.
Press again to make it stop.
Swing
Press Vane button when the unit is turned on.
Press this button to activate the louver setting feature.Each time you press the Vane button button,
the display panel will display the selected louver in an order as(“-0” indicates that four louvers are all
selected):
Press Swing button to start/stop the auto swing feature of the selected louvers.
The system will exit the
louver setting mode If
there is no operations
during a 10 seconds
period.
-1
-2
-3
-4
-0
Vane
4 Louvers
Drücken Sie die Taste Schwenken.(Swing)
Die automatische Schwenkfunktion der
Horizontaljalousie wird erregt.
Drücken Sie erneut, um sie zu stoppen.
Das System verlässt den
Jalousie-Einstellmodus,
wenn keine Bedienung
erfolgt während eines
Zeitraums von 10 Sekun-
den.