How to troubleshoot when the inventum IVW6040A program does not start?
If the Inventum Dishwasher program doesn't start, check the following: * Ensure the mains plug is connected. * Check the fuse box for any issues. * Open the water tap to ensure there is a water supply. * Close the dishwasher door completely. * Start the appliance. * Ensure the water inlet hose and filters are not clogged.
What to do if there is food waste left on the dishes after using the inventum IVW6040A?
If food waste remains on dishes after an Inventum Dishwasher cycle, several factors could be at play: * Ensure the appliance is loaded correctly, allowing spray arms to reach all dishes. * Avoid overfilling the cutlery basket. * Ensure dishes are not too close together. * Use a sufficient amount of detergent. * Select an appropriate program for the load. * Ensure the spray arms are not clogged. * Clean the filters. * Place the filters correctly. * Ensure that the water drain pump is not clogged.
Why are there white stains on the dishes after using the Inventum Dishwasher?
If you notice white stains on dishes after using your Inventum Dishwasher, consider these points: * Ensure you're using enough detergent. * Adjust the rinse aid consumption level. * Fill the salt reservoir if you have hard water and aren't using salt. * Adjust the salt consumption level if the water hardness level setting is too low. * Make sure the salt reservoir cap is closed tightly.
What to do if the inventum IVW6040A Dishwasher contains water when the program is finished?
If your Inventum Dishwasher has water remaining after the program ends: * Check the drain hose for clogs or twists. * Clean the filters. * Wait until the program is finished. When a program is finished, a buzzer sounds five times and the ready indicator is on.
Why does the Inventum Dishwasher stop during a program?
If the Inventum Dishwasher stops mid-cycle, check if there is a power failure and ensure a consistent water inlet supply.
Why does the inventum IVW6040A make unusual sounds during a program?
If your Inventum Dishwasher is making unusual noises during operation, ensure it is loaded correctly so that the spray arms are not hitting the dishes.
Why are the dishes not dry after using the Inventum Dishwasher?
If dishes aren't drying in your Inventum Dishwasher, select a program that includes a drying cycle.
What to do if function indicator is on and the display goes on and off on the inventum IVW6040A?
If a function indicator is on and the display goes on and off, close the door of the Inventum Dishwasher.
Why does the detergent reservoir contain detergent residues in the inventum IVW6040A Dishwasher?
If detergent residues are present in the detergent reservoir of your Inventum Dishwasher, make sure to fill the reservoir when it is dry.
What to do if the ready indicator does not go off when a program is finished on the inventum IVW6040A Dishwasher?
If the ready indicator remains on after a program finishes on your Inventum Dishwasher, release the on/off button.
General| Type | Freestanding |
|---|---|
| Color | White |
| Number of place settings | 14 |
| Number of programs | 6 |
| Noise level | 49 dB |
| Energy efficiency class | A++ |
| Annual Water Consumption | 2520 L |
| Delay Start | Yes |
| Half Load Option | Yes |
| Child Lock | Yes |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
To Next Page