inventum VVW6030AS - User Manual

Questions and Answers

D
Diane VillaAug 20, 2025
How to troubleshoot if the Inventum Dishwasher program does not start?
- M
  mary02Aug 20, 2025
  If your Inventum Dishwasher program doesn't start, several factors could be the cause. First, ensure the mains plug is properly connected. Then, check your fuse box for any issues. Also, verify that the water tap is open to provide a water supply. Make sure the dishwasher door is fully closed and that the appliance is switched on. Lastly, check the water inlet hose and filters to ensure they are not clogged. Following these steps should help resolve the issue.
Z
zandrewsAug 22, 2025
Why does my inventum VVW6030AS Dishwasher leave white stains on the dishes?
- F
  ferrelldianaAug 22, 2025
  If you find white stains on your dishes after using the Inventum Dishwasher, it could be due to several reasons. First, ensure you're using enough detergent by filling the detergent reservoir adequately. Next, check the rinse aid consumption level and adjust if it's set too low. If you have hard water, make sure to fill the salt reservoir. Finally, verify that the salt reservoir cap is tightly closed.
L
Leslie AlvaradoAug 25, 2025
What to do if dishes are not dry after using inventum VVW6030AS?
- B
  Brittany MillerAug 25, 2025
  If your dishes aren't drying properly in the Inventum Dishwasher, the issue might be related to the selected program or the rinse aid level. Ensure you've chosen a program that includes a drying cycle. If the program does include drying, check the rinse aid consumption level and adjust it if it's set too low.
D
Danielle ClarkAug 27, 2025
Why does my Inventum Dishwasher stop during a program?
- G
  gregorycarlyAug 27, 2025
  If your Inventum Dishwasher stops mid-cycle, it could be due to a power failure. Make sure that there is power. Also, it can be caused by a water inlet failure. Ensure that the water supply is properly connected.
X
xfarmerAug 28, 2025
How to prevent food waste left on dishes after using Inventum Dishwasher?
- J
  Jacqueline ReedAug 28, 2025
  If your Inventum Dishwasher leaves food waste on the dishes, it's likely due to incorrect loading. Ensure that you load the appliance correctly, allowing the spray arms to reach all dishes effectively.
M
Mathew ThompsonAug 29, 2025
What to do if my inventum VVW6030AS contains water after the cycle?
- K
  Kyle WoodsAug 30, 2025
  If your Inventum Dishwasher contains water after the program finishes, there are a few things to check. First, inspect the drain hose to ensure it is not clogged or twisted. Next, clean the filters, as they might be blocked. Finally, ensure the program has fully completed; a buzzer will sound five times, and the ready indicator will light up when the program is done.
A
Amy WhiteSep 1, 2025
Why are there rust stains on dishes after using Inventum Dishwasher?
- G
  Gabriel LopezSep 1, 2025
  Rust stains on dishes from your Inventum Dishwasher could stem from several issues. Ensure you're only washing dishwasher-safe items of sufficient stainless steel quality. If the water has a high salt level, adjust the salt consumption. Check that the salt reservoir cap is firmly closed. Clean any salt spills immediately and run a full program to prevent corrosion. If the issue persists, there might be a grounding problem with the mains supply, in which case you should contact an authorized electrician.
J
James OrtizSep 2, 2025
Why does my inventum VVW6030AS Dishwasher make unusual sounds during a program?
- L
  Lindsey PierceSep 2, 2025
  If your Inventum Dishwasher is making unusual noises, it might be because a spray arm is hitting the dishes. To resolve this, make sure you load the appliance correctly.
D
Dr. Jennifer MartinezSep 4, 2025
What does error code F5 mean on my inventum VVW6030AS Dishwasher?
- B
  Brandon GloverSep 4, 2025
  If your Inventum Dishwasher shows error code F5, it indicates an insufficient water supply. Ensure the water tap is fully open and the water supply isn't blocked. Close the tap, remove the inlet hose, and clean the hose filter. If the code persists, contact the Inventum service department.
C
Charles WagnerSep 6, 2025
What does error code F2 mean on my Inventum Dishwasher?
- C
  Caitlyn LopezSep 6, 2025
  If your Inventum Dishwasher displays error code F2, it means the waste water isn't being discharged properly. Check if the drain hose or the filters are clogged. You can also try resetting the program. If the error continues, contact the Inventum service department.

inventum VVW6030AS Specifications

General

Type	Freestanding
Place settings	13
Noise level	49 dB
Number of programs	6
Capacity	13 place settings
Delay Start	Yes
Half Load Option	Yes
Dimensions (H x W x D)	85 x 60 x 60 cm
Annual Water Consumption	2520 L