inventum VVW6008AW - User Manual

Questions and Answers

A
Amy CooperAug 13, 2025
How to fix inventum VVW6008AW Dishwasher if the program does not start?
- S
  Scott WhiteAug 13, 2025
  If your Inventum dishwasher program isn't starting, several factors could be at play. Ensure the mains plug is securely connected and check your fuse box for any issues. The water tap should be open to provide a water supply, and the dishwasher door needs to be fully closed. Also, verify that the appliance is switched on. Lastly, inspect the water inlet hose and filters to ensure they are free from clogs. Connect the mains plug, check the fuse box, open the water tap, close the door, start the appliance and make sure that the water inlet hose and the filters are not clogged.
D
Daniel ClarkAug 17, 2025
Why is there food waste left on the dishes in my Inventum Dishwasher?
- B
  Brenda HollowayAug 17, 2025
  If your Inventum dishwasher leaves food waste on dishes, it might be due to several reasons. Ensure the appliance is loaded correctly, allowing spray arms to reach all dishes. Also, verify you're using enough detergent and selecting a program appropriate for the load. Check if any of the spray arms or filters are clogged. Confirm that the filters are correctly placed and that the water drain pump isn't clogged. Make sure that you load the appliance correctly, fill the detergent reservoir with a sufficient amount of detergent, choose a suitable program, clean the spray arms, clean the filters, make sure that you correctly place the filters and make sure that the water drain pump is not clogged.
G
georgedeborahAug 20, 2025
How to remove white stains on dishes from Inventum Dishwasher?
- A
  Alexander MartinezAug 20, 2025
  If your Inventum dishwasher leaves white stains on the dishes, make sure you're using enough detergent. Also, check that the rinse aid consumption level is properly adjusted. If you have hard water, ensure the salt reservoir is filled. Make sure that you fill the detergent reservoir with a sufficient amount of detergent, adjust the level of rinse aid consumption and fill the salt reservoir.
J
jasminerichardsonAug 25, 2025
Why are the dishes not dry after using my inventum VVW6008AW?
- D
  douglas88Aug 25, 2025
  If your Inventum dishwasher is leaving dishes wet, it could be because the selected program doesn't include a drying cycle. Alternatively, the rinse aid consumption level might be set too low. Choose a program that includes drying or adjust the level of rinse aid consumption.
M
Michael BrownAug 27, 2025
What to do if my inventum VVW6008AW contains water when the program is finished?
- B
  brittany59Aug 28, 2025
  If your Inventum dishwasher contains water after the program finishes, the drain hose may be clogged or twisted, or the filters could be clogged. It's also possible the program hasn't fully completed; a buzzer will sound five times, and the ready indicator will light up when finished. Make sure that the drain hose is not clogged or twisted and clean the filters. Wait until the program is finished.
J
Jose JonesSep 1, 2025
Why are there rust stains on the dishes in my inventum VVW6008AW?
- D
  Deborah MitchellSep 1, 2025
  If you notice rust stains on dishes from your Inventum dishwasher, verify that all items are dishwasher-safe stainless steel. High salt levels in the water could also be a factor, so adjust the salt consumption accordingly. Ensure the salt reservoir cap is tightly closed. Clean any spilled salt immediately after filling and run a full program to prevent corrosion. If the issue persists, there might be a grounding problem with your mains supply, requiring an electrician's attention. Make sure that you only clean dishwasher-safe dishes in the appliance, adjust the level of salt consumption, make sure that the cap of the salt reservoir is closed firmly, make sure that you clean any spilled salt immediately and run a full program to prevent corrosion and contact an authorized electrician.
R
Ryan NicholsSep 4, 2025
What to do if my inventum VVW6008AW Dishwasher stops during a program?
- R
  randy06Sep 4, 2025
  If your Inventum dishwasher stops mid-cycle, it could be due to a power failure or a water inlet issue. Ensure that there is power and make sure that there is water inlet supply.
M
Michelle CurtisSep 8, 2025
Why does my inventum VVW6008AW make unusual sounds during a program?
- B
  brandonwadeSep 8, 2025
  If your Inventum dishwasher is making unusual sounds, it might be because a spray arm is hitting the dishes. Make sure that you load the appliance correctly.