inventum VVW6035AW - User Manual

Questions and Answers

T
Tiffany GarciaAug 17, 2025
How to fix inventum VVW6035AW when the program does not start?
- L
  Linda VanceAug 17, 2025
  If the Inventum Dishwasher program doesn't start, several factors could be at play. First, ensure the mains plug is securely connected. Check your fuse box for any issues. Make sure the water tap is open to provide a water supply. Verify that the dishwasher door is fully closed. If the appliance is off, start it. Lastly, confirm that the water inlet hose and filters aren't clogged.
H
huertashannonAug 20, 2025
Why is there food waste left on the dishes in my inventum VVW6035AW Dishwasher?
- S
  shaun69Aug 20, 2025
  If your Inventum Dishwasher leaves food waste on the dishes, it might be due to incorrect loading, preventing the spray arms from reaching all items. Ensure you load the appliance correctly. Insufficient detergent could also be the cause, so fill the detergent reservoir adequately. Select a program suitable for the load. Clean any clogged spray arms and filters, and make sure the filters are correctly placed. Finally, check the water drain pump for clogs.
T
Taylor BishopAug 23, 2025
How to remove white stains on dishes from inventum VVW6035AW?
- W
  Wanda BoydAug 23, 2025
  If your Inventum Dishwasher has white stains on the dishes, it could be due to several reasons. Ensure you're using enough detergent by filling the detergent reservoir adequately. Check the rinse aid consumption level and adjust if it's too low. If you have hard water, make sure to fill the salt reservoir. Also, verify that the cap of the salt reservoir is tightly closed.
M
Mrs. Wendy QuinnAug 26, 2025
What to do if dishes are not dry after using inventum VVW6035AW Dishwasher?
- E
  Erik WhiteAug 26, 2025
  If your Inventum Dishwasher isn't drying the dishes properly, it might be because the selected program doesn't include a drying cycle. Choose a program that does. Also, the level of rinse aid consumption might be set too low, so adjust it accordingly.
M
Mary MurrayAug 28, 2025
Why does my inventum VVW6035AW still have water in it after the cycle is done?
- P
  parkerjerryAug 28, 2025
  If the Inventum Dishwasher contains water after the program finishes, check the drain hose for clogs or twists and ensure it is not obstructed. Clean the filters, as they may be clogged. Alternatively, the program might not have fully completed; wait until it finishes, indicated by a buzzer and the ready indicator light.
W
William BishopAug 31, 2025
Why are there rust stains on the dishes in my inventum VVW6035AW Dishwasher?
- M
  Marie ThompsonAug 31, 2025
  If rust stains appear on dishes from your Inventum Dishwasher, ensure the dishes are dishwasher-safe stainless steel. Adjust the salt consumption level if it's too high. Verify the salt reservoir cap is closed tightly. Clean any spilled salt immediately after filling the reservoir and run a full program to prevent corrosion. If the issue persists, there may be a grounding problem with the mains supply.
C
Christopher MillerSep 2, 2025
What to do if inventum VVW6035AW stops during program?
- V
  velezmeganSep 2, 2025
  If your Inventum Dishwasher stops mid-cycle, it could be due to a power failure. Make sure that there is power. It may also be due to a water inlet failure. Ensure there is a water inlet supply.
A
Amber HardinSep 5, 2025
Why does my Inventum Dishwasher make unusual sounds during a program?
- B
  Brandon GutierrezSep 5, 2025
  If your Inventum Dishwasher is making unusual sounds, it's possible that one of the spray arms is hitting the dishes. Make sure that you load the appliance correctly.
M
Mr. Gary JohnsonSep 8, 2025
What does error code F5 mean on my inventum VVW6035AW?
- E
  Edward HarrisSep 8, 2025
  If the Inventum Dishwasher displays error code F5, there may be insufficient water supply. Ensure the water tap is fully open and the supply isn't blocked. Close the tap, remove the inlet hose, and clean the hose filter. If the error persists, further assistance is needed.
N
Nancy JimenezSep 12, 2025
What does error code F2 mean on my inventum VVW6035AW Dishwasher?
- W
  William AndersonSep 12, 2025
  If the Inventum Dishwasher displays error code F2, the waste water in the appliance cannot be discharged. Check if the drain hose or the filters are clogged. Reset the program. If the error persists, further assistance is needed.

inventum VVW6035AW Specifications

General

Type	Freestanding
Colour	White
Place settings	12
Number of programs	6
Noise level	49 dB
Drying Class	A
Half Load Option	Yes
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	47 kg
Annual Water Consumption	3360 L
Programs	Eco, Intensive
Delay Start	Yes