8
Product Specifications
Qubit
®
2.0
Fluorometer
Specifications
Environmental Conditions
Operating power: 100–240 VAC, 0.4 A
Frequency: 50–60 Hz
Electrical output: 9 VDC, 1.33 A
Installation site: Indoor use only
Operating temperature: 15–40°C
Maximum relative humidity: 20–80%, non-condensing
Instrument Specifications
Instrument type: Benchtop fluorometer
Instrument dimensions: 5.3” (w) × 8.5” (l) × 1.6” (h)
(13.3 cm × 21.3 cm × 4 cm);
oval shaped
Weight: 11.5 oz (340 g)
Dynamic range: 5 orders of magnitude
Processing time: ≤ 5 seconds/sample
Light sources: Blue LED (max ~470 nm)
Red LED (max ~635 nm)
Excitation filters: Blue 430–495 nm
Red 600–645 nm
Emission filters: Green 510–580 nm
Red 665–720 nm
Detectors: Photodiodes: measurement
capability from 300–1,000 nm
Calibration type: 2- or 3-point standard
Tube type: 0.5 mL Real Time PCR
(polypropylene) tubes
Warm-up time: 2 seconds
Qubit
®
2.0 USB Drive: 2 Gigabyte
To Next Page
Loading...
