To Next PageTo Next Page
Need help?Do you have a question about the Invitrogen Qubit 2.0 and is the answer not in the manual?
General| Detection Method | Fluorescence |
|---|---|
| Sample Volume | 1-20 µL |
| Connectivity | USB |
| Light Source | LED |
| Excitation Wavelengths | 470 nm, 635 nm |
| Fluorometer Type | Fluorometer |
| Display | LCD |
| Power Source | AC adapter |
| Emission Wavelengths | 520 nm |
| Data Storage | Up to 1000 data points |
Essential guidelines and warnings for safe operation and handling of the instrument.
Provides an overview of the instrument's capabilities and purpose.
Highlights the key functionalities and advantages of the instrument.
Describes the touchscreen interface and its main elements for operation.
Details the technical parameters and operational requirements of the instrument.
Initial steps to begin using the Qubit® 2.0 Fluorometer.
Step-by-step guide for setting up the instrument.
Procedures for installing the latest software for the instrument.
Step-by-step guide for creating new calibration curves.
Further steps in the process of running new calibration standards.
How to verify the accuracy of calibration standards.
Step-by-step guide for measuring sample concentrations.
Continues the procedure for reading and measuring samples.
Step-by-step guide to calculate sample concentration.
Steps to diagnose and fix issues causing low sample concentration readings.
Steps to diagnose and fix issues causing high sample concentration readings.
